BS_EN_1504-1-2005_混凝土结构保护和维修用产品和系统．定义、要求、质量控制和一致性评估．第1部分定义.pdf

BRITISH STANDARD BS EN 1504-12005 Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and uation of conity Part 1 Definitions The European Standard EN 1504-12005 has the status of a British Standard ICS 91.080.40, 01.040.91 BS EN 1504-12005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 16 January 2006 BSI 16 January 2006 ISBN 0 580 47484 4 National foreword This British Standard is the official English language version of EN 1504-12005. It supersedes BS EN 1504-11998 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/517/8, Protection and repair of concrete structures, which has the responsibility to A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests ined; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1504-1 July 2005 ICS 91.080.40; 01.040.91Supersedes EN 1504-11998 English Version Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 1 Definitions Produits et systmes pour la protection et la rparation des structures en bton - Dfinitions, prescriptions, matrise de la qualit et valuation de la conit - Partie 1 Dfinitions Produkte und Systeme fr den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Gteberwachung und Beurteilung der Konitt - Teil 1 Definitionen This European Standard was approved by CEN on 2 June 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions English, French, German. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre rue de Stassart, 36 B-1050 Brussels 2005 CENAll rights of exploitation in any and by any means reserved worldwide for CEN national Members. Ref. No. EN 1504-12005 E w w w . b z f x w . c o m EN 1504-12005 E 2 Contents Page Foreword ..........................................................................................................................................................3 1 Scope...................................................................................................................................................4 2 Normative references .........................................................................................................................4 3 Terms and definitions.........................................................................................................................4 Bibliography.....................................................................................................................................................8 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m EN 1504-12005 E 3 Foreword This European Standard EN 1504-12005 has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2006, and conflicting national standards shall be withdrawn at the latest by December 2008. This document supersedes EN 1504-11998. It has been developed by sub-committee 8 “Products and systems for the protection and repair of concrete structures“ Secretariat AFNOR. This document is part of a series of standards dealing with the general considerations related to the products and systems for the repair and protection of concrete structures. The other parts of this Standard are listed below  EN 1504-2, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 2 Surface protection systems for concrete  EN 1504-3, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 3 Structural and non-structural repair  EN 1504-4, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 4 Structural bonding  EN 1504-5, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 5 Concrete injection  prEN 1504-6, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 6 Anchoring of reinforcing steel bar  prEN 1504-7, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 7 Reinforcement Corrosion Protection  EN 1504-8, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 8 Quality control and uation of conity  ENV 1504-9, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 9 General principles for the use of products and systems  EN 1504-10, Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and uation of conity - Part 10 Site application of products and systems, and quality control of the works According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. w w w . b z f x w . c o m EN 1504-12005 E 4 1 Scope This European Standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document including any amendments applies. Not applicable. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 General 3.1.1 batch quantity of material made in a single operation, or in the case of continuous production for a defined quantity in tonnes which shall be demonstrated by the producer to have a uni composition and shall not exceed one day’s production 3.1.2 declared value value declared and documented by the manufacturer for identification or perance requirements 3.1.3 identification test test carried out to verify a declared value of the composition or property of the product or system in terms of consistency of the production NOTE This is to ensure that the product or system being tested corresponds to the product or system subjected to the initial type test, within the permitted tolerances. 3.1.4 perance ability of a product or system to provide an effective and durable repair or protection without adverse effects on the original structure, other structures, site operatives, users, third parties and environment 3.1.5 perance requirements required mechanical, physical and chemical properties of products and systems to provide durability and stability of both the repaired concrete and the structure 3.1.6 perance test test carried out to verify a value for a required property of the product or system in terms of its specified perance during application and use NOTE This is to ensure that the product or system cons to its specified perance characteristics. 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m EN 1504-12005 E 5 3.1.7 product constituents ulated for the repair or protection of concrete structures 3.1.8 systems two or more products which are used together, or consecutively, to undertake repair or protection of concrete structures 3.1.9 technology application of a product or system using specific equipment or for example crack injection 3.2 Main categories of products and systems 3.2.1 anchoring products and systems products and systems which  anchor reinforcement into concrete to give adequate structural behaviour;  fill cavities in order to ensure a continuity between steel and concrete elements. 3.2.2 injection products and systems products and systems which, when injected into a concrete structure, restore the structural integrity and/or durability 3.2.3 non-structural repair products and systems products and systems which, when applied on a concrete surface, restore the geometric or aesthetic aspect of the structure 3.2.4 reinforcement protection products and systems products and systems applied to unprotected reinforcement to provide corrosion protection 3.2.5 structural bonding products and systems products and systems applied to concrete to provide a durable structural bond to additional applied material 3.2.6 structural repair products and systems products and systems applied to a concrete structure, to replace defective concrete and to restore structural integrity and durability 3.2.7 surface protection products and systems products and systems which, when applied, improve the durability of concrete and reinforced concrete structures 3.3 Main chemical types and constituents of protection and repair products and systems 3.3.1 additions finely divided inorganic materials that may be added to repair products in order to improve certain properties or to achieve special properties w w w . b z f x w . c o m EN 1504-12005 E 6 There are two types of additions  nearly inert additions type I; and  pozzolanic or latent hydraulic additions type II. 3.3.2 additives for hydraulic binders products which are added with hydraulic binder to give specific properties and which are not covered by admixtures and additions 3.3.3 additives for reactive polymer products other than admixtures and additions which give the repair product specific properties NOTE Typical additives are, for example  plasticizers;  flexibilizers;  accelerators;  retarders;  materials which regulate the rheology;  pigments;  fillers. 3.3.4 admixtures material added during the mixing process of concrete in a quantity not more than 5 by mass of the cement content of the concrete, to modify the properties of the mix in the fresh and/ or hardened state 3.3.5 coating treatment to produce a continuous protective layer on the surface of concrete NOTE 1 Thickness is typically of 0,1 mm to 5,0 mm. Particular applications may require a thickness greater than 5 mm. NOTE 2 Binders may be, for example, organic polymers, organic polymers with cement as a filler or hydraulic cement modified with polymer dispersion. 3.3.6 hydraulic binders H inorganic material which reacts with water, undergoing a hydration reaction to produce a solid material NOTE They are generally cements coning to EN 197-1 or to EN 413-1, building limes coning to EN 459-1 or in combination with other cements. 3.3.7 hydraulic mortars and hydraulic concretes CC mortars and concretes based on a hydraulic binder which is blended together with graded aggregates and may include admixtures and additions and which, when mixed with water, set by a hydration reaction 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m EN 1504-12005 E 7 3.3.8 hydrophobic impregnation treatment of concrete to produce a water-repellent surface. The pores and capillaries are internally coated, but they are not filled. There is no film on the surface of the concrete and there is little or no change in its appearance NOTE Active compounds may be, for example, silanes or siloxanes. 3.3.9 impregnation treatment of concrete to reduce the surface porosity and to strengthen the surface. The pores and capillaries are partially or totally filled NOTE 1 This treatment usually leads to a discontinuous, thin film on the concrete surface. NOTE 2 Binders may be, for example, organic polymers. 3.3.10 polymer hydraulic cement mortars or concretes PCC hydraulic mortars or concretes modified by the addition of polymer additives, which are added in sufficient quantity to give spe