机械与机电工程学系(9).doc

工學院機械與機電工程學系 【機械與機電工程學系】 Department of Mechanical and Mechatronic Engineering 姓 名林鎮洲 Chen-Chou Lin, Ph.D. 職 稱教授兼系所主任 Professor and Chairman 學 歷美國馬里蘭大學機械工程博士 Univ. of Maryland, U.S.A. 專 長 機構設計、機器人學、創新設計、自動化、水下技術Mechanism Design, Robotics, Creative Design ology, Automation, Underwater Technology 電 話022462-2192 ext 3211 e-mailcclineuler.me.ntou.edu.tw Refereed Papers 1. Lee, J. J., C. C. Lin, and C. P. Chen, 2003, Kinematic Analysis of Mechanisms with Rolling Pairs using Matrix Transation , Journal of the Chinese Institute of Engineers, 264 531-535. SCI 2. Lin, C. C., Chang, W. T., 2003, The Force Transmissibility of Planar Multiloop Linkages, Journal of Mechanical Engineering Science, Proceedings of the Institution of Mechanical Engineers Part C, 21711 1259-1270. SCI 3. Chang, W. T., Lin, C. C., and Lee, J.J., 2003, Force Transmissibility Perance of Parallel Manipulators, Journal of Robotic Systems, 2011 659-670. SCI 4. C. C. Chang, C. C. Lin, J. H. Wang, and M. D. Jeng,2004, “The Study of Remotely TeleoperatedRobotic Manipulator System for Underwater Constructions,“ Engineering Science and Technology Bulletin, 75114-120. in Chinese 5. Chang, W. T., Lin, C. C., and Wu, L. I., 2005, “A Note on Grashofs Theorem,“ Journal of Marine Science and Technology, 134239-248.EI Other Publications 1. 林鎮洲，2003，水下感測元件及系統之研發應用於水下作業-子計畫四運動感測系統之研發用於水下作業系統之運動狀態估測與控制1/3，國科會專題研究成果報告。 2. 林鎮洲，2004，水下感測元件及系統之研發應用於水下作業-子計畫四運動感測系統之研發用於水下作業系統之運動狀態估測與控制2/3，國科會專題研究成果報告。 3. 林鎮洲，吳聲輝，2004，接觸式物件輪廓掃瞄，Newsletter of The Chinese Society of Mechanism and Machine Theory, 151 1-5. Patents 1. 張文桐、林鎮洲、吳隆庸，具有安全釋放功能之義手構造，中華民國專利，新型第 M245957號，10/200410/2013。 2. 張文桐、林鎮洲、吳隆庸、劉俊賢、李維倫，B，人力推進載具用省力踏板驅動機構，中華民國專利新型第 M282911號，20051211-20150320。 姓 名廖世平 Shih-Pin Liaw, Ph.D. 職 稱教授Professor 學 歷美國加州大學洛杉磯分校機械工程博士 UCLA, U.S.A. 專 長沸騰傳熱、流體力學、熱質傳 Boiling Heat Transfer, Fluid Mechanics, Heat Mass Transfer 電 話022462-2192 ext 3214 e-mailspinmail.ntou.edu.tw Refereed Papers 1. 黃棋模、黃國峰、葉榮華、廖世平，2003，蒸發管結霜之研究，海運研究學刊，1445-61。 2. 廖世平、林俊利，2003，口徑20mm葉輪型水錶器差特性及壓力損失量測，中華民國自來水協會會刊，223 24-34。 3. Fan, C.C., Liaw, S.P., Fu, W.R., and Pan B.S., 2003, Mathematical Model for Prediction of Intermittent Drying and Pressing Process of Mullet Roe, Journal of Food Science, 683 886-891. SCI 4. Yeh, R.H., Liaw, S.P. and Yu, H.B., 2003, Thermal Analysis of Welding on Aluminum Plates, Journal of Marine Science and Technology, 114 213-220. EI 5. Yeh, R.H., Liaw, S.P. and Wang, S.L., 2004, “Heat Transfer and Friction Characteristics of Fin-and-Tube Heat Exchangers,“ Journal of Taiwan Society of Naval Architects and Marine Engineers, 23275-85. EI 6. Wang, C.C., Hung, M.T., Yeh, R.H., Chang, Y.J., and Liaw, S.P., 2004, “Flow Visualization Inside the Wavy Channels“, International Journal of Heat Exchangers, 51-14. SCI 7. Yeh, R.H., Liaw, S.P. and Hong, J.Y., 2005, “Numerical and Experimental Study of Boiling Heat Transfer From a Single Cylindrical Fin“, Journal of Enhanced Heat Transfer, 123 225-237. SCI 8. Liaw, S.P., Yeh, R.H., and Yeh, W.T., 2005, “A Simple Design of Fin for Boiling Heat Transfer“, International Journal of Heat and Mass Transfer, 482493-2502.SCI 姓 名傅光華 Kuang-Hua Fuh, Ph.D. 職 稱教授 Professor 學 歷美國威斯康辛大學麥迪遜分校機械工程博士 Wisconsin at Madison Univ., U.S.A. 專 長精密加工、精密量測 Precision Manufacturing, Precision Measurement 電 話022462-2192 ext 3223 e-maila0065mail.ntou.edu.tw Refereed Papers 1. M.D. Chen, R.Q. Hsu and K.H. Fuh, 2005, “Effcets of Over-Roll Thickness on Cone Surface Roughness in Shear Spinning“, Journal of Materials Processing Technology, 1591-8. 2. M.D. Chen, R.Q. Hsu and K.H. Fuh, 2005, “An Analysis of Force Distribution in Shear Spinning of Cone, “ International Journal of Mechanical Science, 47June902921. 姓 名林益煌 Yih-Hwang Lin, Ph.D. 職 稱教授 Professor 學 歷美國賓州州立大學機械工程博士 Pennsylvania State Univ., U.S.A. 專 長振動力學、結構控制、有限元素分析、機械設計 Mechanical Vibrations, Structural Control, Finite Element Analysis, Mechanical Design 電 話022462-2192 ext 3208 e-mailyhl2mail.ntou.edu.tw Refereed Papers 1. Y.-H. Lin, R.-C. Huang, and C.-L, Chu, 2004, “Optimal Modal Control of a Fluid-conveying Pipe with a Divergent Mode”, Journal of Sound and Vibration, 271577-597. SCI NSC-89-2212-E-019-013 2. Y.-H. Lin and H.-C. Yu, 2004, “Active Modal Control of a Flexible Rotor, ”Mechanical Systems and Signal Processing, 181117-1131. SCI NSC-89-2212-E-019-013 3. H.-C. Yu, Y.-H. Lin and C-L. Chu, 2005,“Robust Modal Vibration Suppression of a Flexible Rotor,” Mechanical Systems and Signal Processing, pp.1-14. SCI NSC 91-2611-E-019-024 Accepted Other Publications 1. 林益煌，2003，不穩定旋轉軸之強健振動制抑，國科會專題研究成果報告。 2. 林益煌，2003，軸系迴旋強迫振動分析系統開發，中國造船股份有限公司建教合作委託專題研究成果報告。 3. 林益煌，2003，空氣壓縮機閥片異常自動診斷技術之研究，中國鋼鐵股份有限公司建教合作委託專題研究成果報告。 4. 林益煌，2004，空壓機閥片異常自動監診精簡系統之開發研究，中國鋼鐵股份有限公司建教合作委託專題研究成果報告。 5. 林益煌，2004，輸送流體之提摩憲柯管樑的結構及控制系統同步最佳化設計，國科會專題研究成果報告。 6. 林益煌，2005，具半正定特性之轉子的獨立模態振動控制，國科會專題研究成果報告。 姓 名黃男農 Nan-Nong Huang, Ph.D. 職 稱教授Professor 學 歷美國肯塔基大學工程力學博士 Kentucky Univ., U.S.A. 專 長複合材料力學、熱應力 Mechanics of Composite Materials and Thermal Stress 電 話022462-2192 ext 3227 e-mailb0120mail.ntou.edu.tw 姓 名洪瑞鴻 Jui-Hong Horng, Ph.D. 職 稱教授 Professor 學 歷國立中山大學電機工程博士 Natl. Sun Yat-Sen Univ., R.O.C. 專 長適應控制、電力工程 Supervisory Control, Data Acquisition 電 話022462-2192 ext 3247 e-mailb0243mail.ntou.edu.tw 姓 名王星豪 Shing-Hoa Gilbert Wang, Ph.D. 職 稱教授 Professor 學 歷美國科羅拉多礦冶學院冶金及材料工程博士 Colorado School of Mines, U.S.A. 專 長工程材料、物理冶金、材料機械行為、焊接冶金、金屬成形Engineering Materials, Physical Metallurgy, Mechanical Metallurgy, Welding Metallurgy, Metal ing 電 話022462-2192 ext 3221 e-mailshwangmail.ntou.edu.tw Refereed Papers 1. Y.S. Huang, S.H. Wang, 2003, “Physical Properties and Weldability of Magnesium Alloys”, Welding ＆ Cutting, 13333-42, September, 2003.Referred 2. S.H. Wang, C.C. Chiang, S.L.I. Chan, 2003, “Effect of Initial Microstructure on the Creep Behavior of TMCP EH36 and SM490C Steels”, Materials Science and Engineering A, 3441-2288-295. NSC 87-2216-E-019-007 SCI, EI 3. S.H. Wang, S.H. Wang, M.D. Wei, L.W. Tsay, 2003, “Tensile Properties of LBW Welds in Ti-6Al-4V Alloy at uated Temperatures Below 450℃”, Materials Letters, 57200318151823. NSC 89-2623-7-019-003 SCI, EI 4. S.H. Wang, M.D. Wei, 2004, “Tensile Properties of GTAW weldments in CP-Ti, Ti-6Al-4Vand Ti –15V-3Al-3Sn-3Cr alloys at Different strain Rates”, Science and Technology of Welding and Joining, 95415422. NSC 89-2216-E-019-101 NSC 90-2216-E-019-007 SCI, EI 5. P.K. Chiu, K.L. Weng, S.H. Wang, J.R. Yang, Jason Fang, 2005, “Low-Cycle Fatigue Induced Martensite Transation in SAF 2205 Duplex Stainless Steel”, Material Science and Engineering A, 3982005349359. NEC-91-2216-E-019-009 NEC-92-2216-E-019-010 NEC-93-2216-E-019-003 SCI, EI 6. Chih Sheng Huang, Shing Hoa Wang, Woei Shyan Lee, Tao-Hsing Chen, Charles Lien, 2005, “Dynamic Impact Behavior and Ferrite Variation of the Special stainless steels”, Scripta Materialia, 529843849. NSC-91-2216-E-019-009 NSC-92-2216-E-019 -010 NSC-93-2216-E-019-003 SCI, EI 7. P.K. Chiu, S.H. Wang, K.L. Weng, J.R. Yang, Y.S. Huang, J. Fang, 2005, “A Study of Microstructure and Fatigue Property of Cyclic Plastic Deation in Duplex Stainless Steel and its Weldment”, Journal of Materials Science and Engineering, 372110115. in Chinese NSC-91-2216-E-019-009 NSC-92-2216-E-019-010 NSC-93-2216-E-019-003 Referred 8. S.H. Wang, F.S. Chan, Y.D. Yao, 2005, “Stain Induced Electrical Resistivity and Magnetic Behavior in Inconel 600”, Japanese Journal of Applied Physics, 447A4935-4938. SCI, EI 9. C.S. Huang, S.H. Wang, C.C. Wu, Y.S. Huang, Jason Fang, 2006, “Comparison of Strain Ratio Effect on Cyclic Plastic Deation for Special Stainless Steels“, Scripta Materialia, 5461181-1186. NSC-91-2216-E-019-009 NSC-92-2216-E-019-010 NSC-93-2216-E-019-003 SCI, EI 10. S. H. Wang, P.K. Chiu, J. R. Yang, Jason Fang, 2006, “Gammaγ phase Transation in Pulsed GTAW weld Metal of Duplex Stainless Steel”, Material Science and Engineering A, 4201-226-33. NSC-91-2216-E-019-009 NSC-92-2216-E-019-010 NSC-93-2216-E-019-003 SCI, EI 11. Feng Shiu Chan, Yeong Der Yao, Shing Hoa Wang, 2006, “Low Temperature Electrical Resistivity Study of Deed Inconel Alloy 600”, Journal of Magnetism and Magnetic Materials, 3041e464e466. SCI, EI 12. P.K. Chiu, S.H. Wang, J.R. Yang, K.L. Weng, Jason Fang, 2006, “The Effect of Strain Ratio on Morphology of Dislocation in Low Cycle Fatigued SAF 2205 DSS”, Materials Chemistry and Physics, 981103111. NSC-91-2216-E-019- 009 NSC-92-2216-E-019-010 NSC-93-2216-E-019-003 SCI, EI Other Publications 1. 王星豪、黃義順、王誌聰，2003，特用型雙向不銹鋼銲件之低週期疲勞與高應變速率變形特性1/3，國科會專題期中進度報告。 2. 王星豪、邱柏凱、黃智生，2004，特用型雙向不銹鋼銲件之低週期疲勞與高應變速率變形特性2/3，國科會專題研究期中進度報告。NSC 92-2216-E-019-010 3. 王星豪、黃義順、王誌聰、邱柏凱、黃智生、吳嘉昌，2005，特用型雙向不銹鋼銲件之低週期疲勞與高應變速率變形特性3/3，國科會專題研究成果報告。NSC 93-2216-E-019-003 4. 劉品鈞、施佑蓉、王星豪、洪敏雄，2005.08，材料科學與工程，W.F. Smith，第3版中譯本，McGraw-Hill。 姓 名劉進賢 Chein-Shan Liu, Ph.D. 職 稱教授 Professor 學 歷國立台灣大學土木工程博士 Natl. Taiwan Univ., R.O.C. 專 長塑性力學、應用數學、摩擦動力學 電 話022462-2192 ext 3252 e-mailcsliumail.ntou.edu.tw Refereed Papers 1. Chein-Shan Liu, 2003, The steady-state behavior of the Prandtl-Reuss material bifurcated under nonproportional circular strain paths, J. Chinese Inst. Engineers, 26 173-190. 2. Chein-Shan Liu, 2003, Symmetry groups and the pseudo-Riemann spacetimes for mixed-hardening elastoplasticity, Int. J. Solids Structures, 40 251-269. SCI 3. Chein-Shan Liu, 2003, Two-dimensional bilinear oscillator group preserving scheme and steady state motion under harmonic loading, Int. J. Non-Linear Mechanics, 38 1581-1602. SCI 4. Chein-Shan Liu, 2003, Smoothing elastoplastic stress-strain curves obtained by a critical modification of conventional models, Int. J. Solids Structures, 40 2121-2145. 5. Chein-Shan Liu, Hong-Ki Hong and Der-Yuan Liou, 2003, Two-dimensional friction oscillator group-preserving scheme and handy ulae, J. Sound and Vibration., 26649-74 SCI 6. S. Mukherjee, Chein-Shan Liu, 2003, Computational isotropic–work hardening rate-independent constitutive equations, J. Appl. Mech. ASME., 70 644-648. SCI 7. Chein-Shan Liu and Hong-Ki Hong, 2003, “Spinor maps for symmetries in four dynamical systems, ” Int. J. Appl. Math.,12307-356. 8. Chein-Shan Liu, 2004, “Lie symmetries of finite strain elastic-perfectly plastic models and exactly consistent schemes for numerical integrations,” Int. J. Solids Structures, 411823-1853. SCI 9. Chein-Shan Liu, 2004, A consistent numerical scheme for the von Mises mixed-hardening constitutive equations, Int. J. Plasticity., 20663-704. SCI 10. Chein-Shan Liu, 2004, “Group preserving scheme for backward heat conduction problems,” Int. J. Heat Mass Transfer, 472567-25764. SCI 11. Chein-Shan Liu, Zheng-Ming Huang, 2004, “The steady-state responses of SDOF viscous-elastoplastic oscillator under sinusoidal loadings,” J. Sound Vibration, 273149-173. SCI 12. Chein-Shan Liu, 2004, “Internal symmetry groups for the Drucker-Prager material model of plasticity and numerical integrating s,” Int. J. Solids Structures, 413771-3791. SCI 13. Chein-Shan Liu, 2004, “Lie symmetry of the Landau-Lifshitz-Gilbert equation and exact linearization in the Minkowski space,” Zeit. ang. Math. Phy. ZAMP, 55606-625. SCI 14. Chein-Shan Liu and Chih-Wen Chang, 2004, “Lie group symmetry applied to the computation of convex plasticity constitutive equation,” CMES Computer Modeling in Engineering Sciences, 6277-294. SCI 15. Chein-Shan Liu, 2004, “Internal symmetry groups for perfect elastoplasticity under axial-torsional loadings,” J. Chinese Inst. Engineers, 27993-1002. SCI 16. Chein-Shan Liu, 2004, “The g-based Jordan algebra and Lie algebra ulations of the Maxwell equations,” J. of Mechanics, 20285-296. SCI 17. Chein-Shan Liu, 2004, “Lie-Poisson bracket and dissipative bracket ulations of perfect plasticity,” J. Inst. Civil Hydraulic Engng., Special Issue, pp. 815-829. 18. Chein-Shan Liu, 2005, “The asymptotic behavior of perfectly elastoplastic model under periodic square generalized strain paths,” J. Chinese Inst. Engineers, 28131-146. SCI 19. Chein-Shan Liu and Chih-Wen Chang, 2005, “Non-canonical Minkowski and pseudo-Riemann frames of plasticity models with anisotropic quadratic yield criteria,” Int. J. Solids Structures, 422851-2882. SCI 20. Chein-Shan Liu and Chi-Fu Li, 2005, “Geometrical numerical algorithms for a plasticity model with Armstrong-Frederick kinematic hardening rule under strain and stress controls,” Int. J. Num. Meth. Engng., 631396-1423. SCI 21. Chein-Shan Liu, 2005, “Computational applications of the Poincare group on the elastoplasticity with kinematic hardening,” CMES Computer Modeling in Engineering Sciences, 8231-258. SCI 22. Chein-Shan Liu and Yu-Ling Ku, 2005, “A combination of group preserving scheme and Runge-Kutta for the integration of Landau-Lifshitz equation,” CMES Computer Modeling in Engineering Sciences, 9151-178. SCI 23. Chein-Shan Liu, 2005, “Nonstandard group-preserving schemes for very stiff ordinary differential equations,” CMES Computer Modeling in Engineering Sciences, 9255-272. SCI 24. Chih-Wen Chang, Chein-Shan Liu and Jiang-Ren Chang, 2005, “A group preserving scheme for inverse heat conduction problems,” CMES Computer Modeling in Engineering Sciences, 1013-38. SCI Other Publications 1. 劉進賢，2003，傳統彈塑性模式應力應變曲線的平滑化I，國科會專題研究計劃精簡報告，臺灣海洋大學機械與輪機工程學系，共10頁。 2. 劉進賢，2004，彈塑性模式之廣義漢彌頓架構，國科會專題研究計劃精簡報告，NSC92-2212-E-019-006，臺灣海洋大學機械與機電工程學系，6頁。 姓 名趙玉星 Yu-Hsing Chao, Ph.D. 職 稱副教授 Associate Professor 學 歷美國華盛頓大學機械工程博士 Washington Univ., U.S.A. 專 長破壞力學、實驗力學 Fracture Mechanics, Experimental Mechanics 電 話022462-2192 ext 3205 e-mailb0067mail.ntou.edu.tw 姓 名晉茂林 Mou-Lin Jin, Ph.D. 職 稱副教授 Associate Professor 學 歷美國北卡羅萊納州立大學機械工程博士 North Carolina State Univ., U.S.A. 專 長學習控制、實驗力學、學習控制器設計Adaptive Learning Control, Neuro Control 電 話022462-2192 ext 3213 e-mailb0100mail.ntou.edu.tw 姓 名田華忠 Hwa-Chong Tien, Ph.D. 職 稱副教授 Associate Professor 學 歷美國俄亥俄州立大學機械工程博士 Ohio State Univ., U.S.A. 專 長熱傳學、熱流分析與模擬、電子冷卻 Heat Transfer, Fluid Mechanics, Electronic Cooling 電 話022462-2192 ext 3225 e-mailhctienmail.ntou.edu.tw Refereed Paper 1. H. C. Tien and W. D. Huang, 2005/03,“Simulation and Assessment of Air impingement Cooling on Squared Pin-Fin Heat Sinks Applied in Personal Computers, ” J. Marine Science and Technology, 1320-27. EI Other Publication